page 1 www.citrelay.com phone - 763.535.2339 fax - 763.535.2194 speci? cations and availability subject to change without notic e. dimensions shown in mm. dimensions are shown for reference purp oses only. rohs compliant a17 16.5 x 15.5 x 24.3 mm ? switching capacity up to 30a ? small size and light weight ? suitable for automobile and lamp accessories coil data* general data* contact data* contact arrangement 1a = spst n.o. contact rating 20a @ 14vdc n.o. 30a @ 14vdc n.o. contact resistance < 50 milliohms initial contact material agsno 2 maximum switching power 280w maximum switching voltage 75vdc maximum switching current 30a electrical life @ rated load 100k cycles, average mechanical life 10m cycles, average insulation resistance 100m min. @ 500vdc initial dielectric strength, coil to contact 750v rms min. @ sea level i nitial contact to contact 500v rms min. @ sea level initial shock resistance 98m/s 2 for 11 ms vibration resistance 1.5mm double amplitude 10~55hz operating temperature -40 o c to +85 o c storage temperature -40 o c to +85 o c solderability 260 o c for 5 s weight 13g features coil voltage vdc coil resistance +/- 10% pick up voltage vdc (max) 75% of rated voltage release voltage vdc (min) 10% of rated voltage coil power w operate time ms release time ms rated max 0.96w 12 15.6 150 9.0 1.2 0.96 10 5 24 31.2 600 18.0 2.4 0.96 * values can change due to the switching frequency, desired reliability levels, environmental conditions and in-rush load levels. it is recommended to test actual load conditions for the application. it is the user?s responsibility to determine the performance suitability for their speci c application. the use of any coil voltage less than the rated coil voltage may compromise the operation of the relay. r r ? sw it ch in g ca pa ci ty u p f e r r r
www.citrelay.com phone - 763.535.2339 fax - 763.535.2194 speci? cations and availability subject to change without notic e. dimensions shown in mm. dimensions are shown for reference purp oses only. a17 page 2 bottom views schematic & pc layout 1. series a17 1a s 12vdc .96 a17 2. contact arrangement 1a = spst n.o. (20a contacts) 1ah = spst n.o. (30a contacts) 3. sealing option s = sealed 4. coil voltage 12vdc 24vdc 5. coil power .96 = .96w 6. coil suppresion blank = standard r = resistor (1100 for 12vdc, 4300 for 24vdc) d = diode (1n405) cathode on 86 terminal ordering information dimensions units = mm 23.70 [.93] 2.80 typ [.11] 11.00 typ [.43] 0.80 typ [.03] 15.00 [.59] 16.00 [.63] 7.80 [.31] 8.00 [.31] 87 86 30 85 7.80 [.31] 8.00 [.31] (4x) ? 3.00 [.12]
|
